Plumber’s tips on lowering excessive water pressure

When water pressure is too high

Pbbbtttt!

Excessive water pressure can be counterproductive and expensive in terms of utility bills. (Photo Credits) 

Too much water pressure can be an annoyance in any household. Apart from being a hassle it could also increase water usage. It is important that this matter be addressed as quickly as possible to lessen the hassle it brings. A/C And HVAC 

The website DIY Plumbing Advice explained the reason for high water pressure.

“The most common source of excessive water pressure is the municipal water supplier. The water company sets the pressure to meet their own needs, such as delivering water to fire hydrants, high elevation buildings (or tall ones), and other reasons. This water pressure is often well over 100 psi, and too often over 150 psi. However, the maximum recommended pressure for a residence is 80 psi.”

Plumber Hacks homeowners can use when issues arise

Read the rest of the article here.

Water Pressure Level

Service Ratings Website Angie’s List also came up with its own explanation n the consequences of high water pressure, and what can be done about it. Plumbing Association of San Diego  

“If you have consistent water pressure in your home that exceeds 80 psi, you should have a water pressure regulator installed on a water line coming into the home. Some people call this a pressure regulating valve, or PRV. If your home was built after 2002, a PRV may already be installed, since that was the year it became required on all new homes. However, a typical PRV’s lifespan is about 7 to 12 years. Usually this valve is located near your shut-off valve.”

Check out the rest of the article here.

Related Plumbing Repair and Installation Services

SF Gate also came up with a tutorial guide on how to reduce water pressure level.

“Locate an outdoor or laundry faucet with a threaded spout and screw on a water pressure meter. You can buy the meter at a hardware store or rent one from a rental outlet. Turn on the water, note the pressure and leave the water turned on. If there’s already a meter installed on the water line after the pressure-reducing valve, you can skip this step.”

Plumbing Details to inspect before buying an older home

Read the other steps here.

Excessive water pressure can damage plumbing fixtures at home. The safest way to address this is by calling a plumbing contractor.

Diamond Ace Contractors

5052 Genesee Ave, San Diego, CA 92117
(888) 231-1086

Diamond Ace Contractors Plumber in San Diego CA

HVAC Experts on installing an exhaust fan

 

The post Plumber’s tips on lowering excessive water pressure appeared first on Blue Diamond Plumbing.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s